Broward County, Florida
Structural Concrete in Broward County: Foundations, Slabs and Additions
Foundations, slabs and structural pours for new construction and additions.
In short
Who handles structural concrete in Broward?
Unified GCS forms, reinforces and places structural concrete in Broward County for owners, developers and general contractors. The work involves building footings, grade beams, slabs, columns, shear walls, elevator pits and tilt-up panels from the structural engineer's drawings, under a city building permit, and meeting the High-Velocity Hurricane Zone requirements of the Florida Building Code.
Structural Concrete · Broward
Structural concrete in Broward County is built in a dense, mostly developed county, so the work is as much about access and sequence as it is about forming and pouring. Unified GCS forms, reinforces, places and finishes footings, grade beams, slabs-on-grade, elevated slabs, columns, shear walls and tilt-up panels for new buildings, additions and structural modifications to existing ones.
We also repair foundations on existing buildings where settlement or cracking has appeared. That work begins with an engineer's evaluation of the cause. Our part is carrying out the specified repair, which can include underpinning coordination, new footings or grade beams, crack repair and rebuilding of damaged structural members, with shoring in place while the load is transferred.
Written and reviewed by the Unified GCS project team, 45 years in concrete restoration and construction. Last reviewed October 2026.


Local conditions
Building on Broward County ground
Site conditions change across the county. Near the coast and the Intracoastal in Fort Lauderdale, Hollywood and Pompano Beach, the water table is close to the surface and excavations for footings and pits need dewatering. Farther west, in parts of Davie, Miramar and Weston that were built on former wetlands, organic muck has to be removed and replaced with compacted fill before a slab or foundation can be placed.
Broward and Miami-Dade are the two counties covered by the High-Velocity Hurricane Zone provisions of the Florida Building Code, which affects structural design and the inspections a project receives. Much of the new structural work here is infill and redevelopment: warehouse and commercial buildings on tight lots, additions to existing structures, and equipment foundations inside operating facilities. Concrete deliveries and pump locations have to be planned around neighbors and traffic.
Where this work is needed
New concrete work by property type in Broward
Industrial and commercial owners generate much of the new concrete work in Broward. Warehouse expansions and tilt-up buildings in Pompano Beach, Deerfield Beach, Davie and Miramar need foundations, slabs, panels and dock walls. Marine businesses along the New River and Marina Mile need heavy pads and equipment foundations. Near Port Everglades and the airport, operators add truck scales, generator pads, tank foundations and mezzanine footings inside buildings that stay in use, so the concrete is placed in small, tightly scheduled pours.
Existing residential and institutional properties in Broward produce a different kind of structural job. Condominium towers along A1A add generator enclosures, new stair or elevator structures and replacement columns or beams called for in an engineer's report. Medical and office campuses in Plantation, Coral Springs and Fort Lauderdale add equipment pads, vaults and small additions between occupied buildings. Infill lots near downtown Fort Lauderdale and Hollywood leave little room for forms, steel deliveries or a pump truck, so access is planned before the first excavation.
What is included
Structural concrete in Broward County: scope of work
- 01Footings, foundations and grade beams
- 02Slab-on-grade and elevated slabs
- 03Columns, beams, shear walls and tilt-up panels
- 04Foundation settlement and crack repair
- 05Formwork, reinforcing steel and pump placement
- 06Structural additions and modifications

Our approach
How we run structural pours on tight and active sites
Before a pour, we review the structural drawings and shop drawings for reinforcing steel, confirm embeds and sleeves with the other trades, and schedule the inspections the building department and the engineer require. Formwork and steel are checked against the drawings before concrete is ordered. Placement is by pump where trucks cannot reach, and finishing crews are sized to the pour.
On additions and modifications to occupied buildings, we shore existing structure before cutting or loading it, separate the work area from tenants and residents, and schedule noisy or disruptive operations with the owner. Curing and form removal follow the engineer's requirements, and test cylinders are taken as the specification directs so strength is documented before loads are applied.
Unified GCS has 45 years in the business. See the full structural concrete service or everything we do in Broward County.
Planning the project
Planning a structural pour in Broward
Structural concrete in Broward is planned from the ground up, starting with a geotechnical report. That report tells the structural engineer what the soil can carry, how high the groundwater sits and whether muck or loose fill must be removed. The engineer's signed and sealed drawings then go to the city building department for permit review under the Florida Building Code and its High-Velocity Hurricane Zone provisions. Reinforcing steel shop drawings, the concrete mix submittal and the inspection sequence are approved before any forms are built.
Weather and logistics set the pour schedule in Broward. Summer pours start at dawn so the concrete is placed and finished before the heat of the day and the afternoon storms. Excavations near the coast are dewatered, and open footings are protected from heavy rain that can flood them. During hurricane season, formwork, rebar cages and stored materials are braced or secured when a storm approaches. Truck routes, pump locations and any lane closure are arranged with the city in advance.
How a project runs
From the first site walk to the closed permit.
- 01
Walk the property
We start on site with your manager, board or engineer and look at the conditions first-hand.
- 02
Define the scope
You get a written scope tied to the engineer's report or our findings, with the phasing spelled out.
- 03
Plan access and safety
Swing stages, shoring, barricades, parking and resident notices are set before the first cut.
- 04
Do the work
Our crews carry out the repairs in sequence, with inspections at the points the engineer requires.
- 05
Close it out
Final inspections, permit closure and a record of what was done, for the association's files.
Cities served
Structural Concrete across Broward County
Summary
Key takeaways for Broward owners and boards
- 01
Much new structural concrete in Broward is industrial: tilt-up panels, dock walls and equipment foundations in Pompano Beach, Davie and Miramar.
- 02
A geotechnical report comes first on a Broward site, because groundwater depth and buried muck decide the foundation design.
- 03
Structural drawings for a Broward project are reviewed under the High-Velocity Hurricane Zone provisions of the Florida Building Code.
- 04
Summer pours in Broward start at dawn to finish before the afternoon heat and thunderstorms.
Questions
Structural Concrete in Broward: common questions
What causes foundation settlement in Davie, Miramar and western Broward County?
Common causes are organic soils or poorly compacted fill beneath the footing, changes in groundwater, and added loads the foundation was not designed for. Stair-step cracks, sloping floors and doors going out of square are the signs. A geotechnical or structural engineer identifies the cause and specifies the repair we carry out.
Do structural concrete pours in Fort Lauderdale require special inspections?
Structural work is inspected by the city building department at defined stages such as reinforcing steel before a pour. Larger buildings classified as threshold buildings under Florida law also require a special inspector retained by the owner. The engineer of record and the building official determine what applies to your project.
Can you pour equipment foundations inside an operating building in Pompano Beach?
Yes. We saw-cut and remove the existing slab in a controlled area, excavate, form and reinforce the new foundation, and place concrete by pump or buggy. Dust, noise and access are planned with the facility so production or storage around the work area continues.
Is a soil report needed before pouring a foundation in Broward County?
For structural work, the engineer normally requires one. Soil and groundwater vary widely across the county, and the report sets the bearing capacity and any soil replacement the design depends on. For structural concrete in Broward County we build from the engineer's drawings, so the geotechnical findings are already reflected in the footing sizes and details we receive.
How are tilt-up panels built for a warehouse in Deerfield Beach or Miramar?
Tilt-up panels are cast flat on the building slab or a casting bed, with reinforcing, embeds and lifting inserts set to the shop drawings. Once the concrete reaches the specified strength, a crane lifts each panel onto its footing, where it is braced until the roof structure and connections tie the building together.
How does hurricane season affect a concrete construction schedule in Fort Lauderdale?
Work continues from June through November, but the schedule should allow for storm days. When a storm threatens, forms and reinforcing are braced, loose material is removed or tied down and cranes are secured as their manufacturers require. Pours are not started if they cannot be finished and protected before the weather arrives.
Regulations referenced
- Broward County Board of Rules and Appeals Policy 05-05: Building Safety Inspection Program
- Florida Statute 553.899: mandatory structural inspections for condominium and cooperative buildings
- Florida Statute 718.112: structural integrity reserve studies
This page is general information, not legal or engineering advice. Inspections are performed by licensed engineers and architects, and your building official sets the dates that apply to your property. Unified GCS is the contractor that carries out the repairs.
Referred by an engineer?
Have drawings, specifications or a full set of bid documents?
Most of our restoration, pool and roofing work comes to us through structural engineers, property engineers and board members. When the scope is already drawn and specified, we price exactly what is on the documents, flag anything that needs a question, and show every line so the board can compare bids fairly.
Request an estimate
Let's look at your building.
Send us the engineer's report, a few photos or a short description. We will schedule a site visit and follow up with a written scope.
- 45 years in the business
- Broward and Palm Beach counties
- Reply within one business day
Prefer to talk?(561) 678-4182
We reply within one business day. Your details are only used to respond to this request.