(561) 678-4182 Request an estimate

Send us your documents

Send Us Your Bid Package, Drawings or Specifications

Upload an engineer's report, a full set of bid documents or a few photos, and we will tell you what comes back and when.

In short

What should I send Unified GCS to get a restoration bid?

Send whatever you have. A complete bid package includes the engineer's report, signed and sealed drawings, the specifications or project manual, the bid form and every addendum. Photos, prior repair records and a survey also help. Upload files through the form at the bottom of this page, or paste a download link in the message for large sets, and we confirm receipt and tell you when to expect our bid.

What to send

What belongs in a complete bid package

A complete bid package lets us price exactly the work your engineer designed, with nothing guessed. At its core are the engineer's condition report, the signed and sealed repair drawings, and the specifications or project manual with its general conditions, technical sections and product requirements. The bid form tells us which items are lump sum and which are unit prices, and every addendum issued so far tells us what has changed. If any of these are missing we can still help, but the bid will carry more clarifications.

Supporting material matters more than people expect. Photographs of the worst areas, the record of previous repair campaigns, earlier engineering reports, a survey, as-built drawings if they exist, and notes about access, parking, pool season or resident restrictions all change how we plan and price the work. A short note on the owner's priorities, such as finishing the oceanfront elevation before the busy season, helps us propose phasing that fits the property instead of a generic sequence.

Our review

How we review the documents you send

An estimator reads the full set before anyone starts counting. We check that the drawings, specifications and bid form agree with each other, list the addenda we received, and flag conflicts, missing details and anything that cannot be priced as written. Quantities on the bid form are checked against the drawings, and where the engineer has marked repair locations we review them sheet by sheet. Named products are checked for availability, because a discontinued coating or mortar is better raised during bidding than after award.

Where a site visit is possible, we walk the building. On a formal bid that usually means the engineer's pre-bid walk, and on a smaller project we arrange a visit with the manager. We look at access for swing stages and equipment, staging space, garage clearances, pool deck loading, power and water, and the condition of areas the drawings show only in outline. Questions that come out of the review go to the engineer in writing, so the answer reaches every bidder at the same time.

Our superintendent reviewing a bid package of repair drawings and specifications on site

Our response

What you get back from us

On a formal bid, you receive the bid form completed exactly as issued, with every line priced and every addendum acknowledged. Alongside it comes a short letter with clarifications, plain exclusions, the proposed duration and phasing, the crew and equipment plan, and any voluntary alternates kept separate from the base bid so they do not cloud the comparison. If the specification asks for qualifications, references or a schedule of values, those come back in the format requested rather than in a brochure of our own.

Requests for information raised during review go to the engineer before the bid date, numbered and tied to a sheet or specification section. Where the documents leave a quantity open, such as an allowance for hidden conditions, we price it as the bid form instructs and note the assumption. The goal is a bid the engineer can level against the others without calling us, and a number that holds once the work starts because the scope behind it was read carefully from the first page to the last.

Timing

When you will have our bid

Turnaround depends on the size of the project and the completeness of the bid package. A balcony repair on a single building reads quickly, while a combined garage, tower and pool project with many unit-priced locations and a thick project manual takes longer. When your bid package arrives we confirm receipt, tell you whether we will bid, and tell you when you will have our number. If your bid date is fixed, put it in the message, and we will say at once if it is too tight for a careful price.

Where a decline is the right answer, we give it early. A project outside our area, outside our trades, or on a timeline we cannot staff deserves a quick no so you can find another bidder. When we do commit, we keep the engineer informed if open questions are holding us up, rather than going quiet until the deadline. With 45 years in the business behind us, we would rather decline a bid honestly than submit one we have not read properly and then defend it later.

Starting earlier

If you only have a report or photos

Many owners and managers do not have drawings yet, and that is fine. If you have an engineer's milestone or condition report, send it, and we will read the findings and walk the property. If you have only photographs of cracking, rust staining, leaks or loose concrete, send those with the address and a short description. We can tell you what those conditions usually involve and which work they point toward, and for structural repairs we will recommend a licensed engineer to design the repair before bidding.

For non-structural work, such as coating renewal, sealant replacement or some flatwork, a written proposal based on our own site visit may be all the project needs. For structural concrete, garage repairs and anything that comes out of a milestone inspection, the engineer's documents protect the owner and give every bidder the same scope to price. Either way, the conversation starts with the same upload, and we will tell you plainly which route your project needs and what the next step is.

Send it now

Upload your documents using the form below

The form at the bottom of this page accepts PDF and image uploads, so drawings, specifications, reports and photographs can go straight through. Large bid sets often exceed what a web form can carry. For those, share a download link from your file transfer or cloud storage service and paste it into the message field, along with the bid date, the site walk date and the name of the engineer of record. Include a phone number so our estimator can call you with questions.

Tell us in the message what you need back: a formal bid on your form, a planning conversation about scope and phasing, or advice on whether you need an engineer first. Projects anywhere in Broward and Palm Beach counties are welcome, from the balconies on a single building to a combined garage, pool and roof project. Send your bid package through the form below, and we will confirm receipt and let you know when you will have our response.

Checklist

Your bid package checklist

  1. 01Engineer's condition or milestone report
  2. 02Signed and sealed repair drawings
  3. 03Specifications or project manual
  4. 04Bid form and all addenda
  5. 05Photographs of the problem areas
  6. 06Prior repair history and reports
  7. 07Survey or as-built drawings
  8. 08Bid date, site walk date and contacts

Summary

Bid package key takeaways

  • 01

    A complete bid package includes the engineer's report, sealed drawings, specifications, the bid form and every addendum.

  • 02

    We return the bid on your form, with clarifications, exclusions, a schedule and any RFIs raised during review.

  • 03

    When a bid package arrives we confirm receipt and tell you when you will have our bid.

  • 04

    A report or a set of photos is enough to start, and we will say if you need an engineer first.

  • 05

    Upload PDFs and images through the form below, or paste a download link for large sets.

Questions

Bid package questions.

What file types can I upload?

The form accepts PDF and image uploads, which covers drawings, specifications, reports and photographs. If your documents are in another format, or the set is too large for the form, share a download link from your file transfer or cloud storage service and paste it into the message so our estimator can retrieve the full set.

Do I need drawings before contacting you?

No. An engineer's report, a page from a reserve study or a few photographs are enough to start. We will review what you send, visit the property, and tell you whether the work can be proposed directly or whether a licensed engineer should design the repair first, which is usually the case for structural concrete and milestone inspection repairs.

Will you price our bid form exactly as written?

Yes. The base bid follows the form as issued, line by line, with unit prices where the form calls for them and every addendum acknowledged. Anything we would do differently goes in as a voluntary alternate or a substitution request, kept separate so the engineer can compare our bid directly with the others.

Do you attend pre-bid meetings and site walks?

Yes, whenever the schedule allows, and we recommend them. A site walk shows conditions that drawings cannot, such as access limits, staging space, garage clearances and how residents use the building. Include the walk date and location in your message so we can plan around it, and we will send any questions through the engineer afterward.

Is my project too small to send?

Probably not. We price balcony and slab edge repairs on a single building, garage sections and pool deck work as well as large multi-phase restoration. If a project falls outside our trades or our service area, we tell you quickly so you can find the right contractor without losing time.

Can I send documents for a roofing or pool project?

Yes. Roofing specifications from a roof consultant, commercial pool drawings and garage repair documents are reviewed the same way as concrete restoration sets. We price them on the form provided, raise questions through the consultant or engineer, and coordinate with any other trades the documents include.

Standards and references

Repair methods and materials on every project follow the engineer's specification, the manufacturer's requirements and the building code in force. This page is general information, not engineering advice.

Request an estimate

Send us your documents.

Send us the engineer's report, a few photos or a short description. We will schedule a site visit and follow up with a written scope.

  • 45 years in the business
  • Broward and Palm Beach counties
  • Reply within one business day

Prefer to talk?(561) 678-4182

Optional. For a large bid package, paste a download link in the message instead. Images or PDF, up to 50 MB.

We reply within one business day. Your details are only used to respond to this request.

Call Request an estimate