Broward County, Florida
General Contractor in Broward County for Restoration and Capital Projects
One contractor accountable for the schedule, the trades and the finished building.
In short
Who handles general contractor in Broward?
Unified GCS works as a general contractor in Broward County for condominium associations, commercial owners and industrial operators. The role involves holding one contract for the whole project, pulling the permits, performing the concrete and envelope work with our own crews, hiring and supervising the other licensed trades, and managing schedule, inspections and closeout.
General Contracting · Broward
A general contractor in Broward County running a building restoration has to manage far more than concrete. A typical project involves structural repair, waterproofing, stucco and paint, railings, windows and doors, roofing, electrical corrections and the permits and inspections for each. Unified GCS manages that whole scope under one contract, with one schedule and one point of contact for the board, the manager and the engineer.
We also take on commercial construction and renovation work: build-outs, structural modifications, capital improvement projects and ongoing maintenance programs for buildings and communities. The common thread is concrete and the building envelope, which is the work our own crews perform. Other trades are scheduled and supervised by us so that each one starts when the surface or structure is ready for it.
Written and reviewed by the Unified GCS project team, 45 years in concrete restoration and construction. Last reviewed October 2026.


Local conditions
Why Broward County projects need a single accountable contractor
The county's Building Safety Inspection Program covers both structural and electrical conditions, so a single report can require concrete repair, railing replacement and electrical work at the same time. The policy gives a limited period to complete required repairs unless the building official approves a longer schedule. Splitting that scope among separate contractors with separate permits makes the deadline harder to meet and leaves the board coordinating the trades.
Broward has many separate municipalities, each with its own building department, permit portal and review times, all applying the same Florida Building Code with the Broward County amendments. A project in Fort Lauderdale is processed differently from one in Pompano Beach or Hallandale Beach. Knowing what each department expects in a submittal, and scheduling inspections so crews are not left waiting, has a direct effect on how long a building lives with scaffolding.
Where this work is needed
The projects Broward owners hand to one contractor
Coastal condominium towers in Broward most often need a general contractor after an inspection report, when concrete, railings, waterproofing, windows, paint and electrical corrections must all happen on one occupied building. Hotels on Fort Lauderdale beach and Hollywood beach bring a different project: exterior and amenity renovations compressed into the slower months between late summer and the winter season, with rooms still in use. In both cases one contractor controls the access equipment, the staging area and the sequence of trades.
Inland Broward generates multi-building and commercial work. Condominium and homeowner associations in Plantation, Sunrise, Tamarac and Coral Springs run capital programs covering catwalks, stairs, roofs, paint and paving across dozens of buildings. Shopping center and office owners along University Drive and in the Cypress Creek corridor need facade, garage and tenant-area work completed while businesses stay open. Industrial operators in Pompano Beach, Davie and near Port Everglades combine floor, dock, structural and office build-out work in one planned mobilization under one schedule.
What is included
General contractor in Broward County: scope of work
- 01Commercial general construction and build-outs
- 02Building renovation and capital improvement projects
- 03Roofing and roof repair coordination
- 04Permitting, scheduling and trade coordination
- 05Site assessment, consultation and budgeting support
- 06Ongoing maintenance programs for buildings and communities

Our approach
How we manage a multi-trade project on an occupied property
We build one master schedule from the engineer's documents and sequence the trades by elevation or area: structural repair, then waterproofing, then openings and railings, then stucco and paint. Access equipment is shared between trades where possible so it comes down sooner. Long-lead items such as railings and impact doors are released early.
The board and manager receive regular written updates covering progress, upcoming closures, quantity changes confirmed by the engineer and any decisions needed from the association. Resident notices go out before work affects a stack, a parking area or an amenity. At the end we close every permit and hand over the record documents, warranties and maintenance recommendations for the installed systems.
Unified GCS has 45 years in the business. See the full general contracting service or everything we do in Broward County.
Planning the project
Setting up a multi-trade project in Broward
A multi-trade project in Broward is easier to manage when the roles are fixed at the start. The owner or board hires the engineer or architect, who prepares the documents and inspects the work. The contractor builds from those documents and answers for every trade on site. Boards should have all bidders quote the same documents, ask each for a phasing plan and schedule, and confirm state licensing and insurance through public records before signing. Association counsel normally reviews the contract.
The pre-construction period sets the pace of a Broward project. Permit review times differ from city to city, so applications and long-lead orders go in as early as the documents allow. The schedule should show the rainy season and hurricane season plainly, with exterior coatings placed in drier months where possible and a written plan for securing the site when a storm approaches. On occupied property, the staging area, crew parking, working hours and the notice procedure for residents or tenants are agreed before mobilization.
How a project runs
From the first site walk to the closed permit.
- 01
Walk the property
We start on site with your manager, board or engineer and look at the conditions first-hand.
- 02
Define the scope
You get a written scope tied to the engineer's report or our findings, with the phasing spelled out.
- 03
Plan access and safety
Swing stages, shoring, barricades, parking and resident notices are set before the first cut.
- 04
Do the work
Our crews carry out the repairs in sequence, with inspections at the points the engineer requires.
- 05
Close it out
Final inspections, permit closure and a record of what was done, for the association's files.
Cities served
General Contracting across Broward County
Summary
Key takeaways for Broward owners and boards
- 01
Broward hotels often compress exterior and amenity renovations into the slower months between late summer and the winter season.
- 02
Inland Broward associations run capital programs across dozens of buildings, which makes phasing and resident notice the main management tasks.
- 03
The owner hires the engineer and the contractor builds from the engineer's documents, so each party in a Broward project has a distinct role.
- 04
Permit review times differ between Broward cities, so applications and long-lead orders should be submitted as early as possible.
Questions
General Contracting in Broward: common questions
Who pulls the permits for a restoration project in Fort Lauderdale or Pompano Beach?
We do, as the general contractor. The engineer provides signed and sealed repair documents, we submit them to the city building department with the permit application, and we schedule the municipal inspections. Trade permits for work such as electrical are pulled by the licensed subcontractor under our coordination.
Can one contractor handle both the structural and electrical items in a Broward County inspection report?
Yes. As general contractor we perform the concrete, waterproofing and envelope work with our own crews and bring in a licensed electrical contractor for the electrical items. The association has one contract and one schedule, and the engineer has one team to coordinate with for re-inspection.
Do you take on commercial projects in Broward County that are not condominiums?
Yes. We work for commercial owners, industrial operators, hotels and developers on build-outs, structural modifications, floor and slab work, facade repair and capital improvements. The same approach applies: a defined scope, a schedule built around your tenants and operating hours, and one contractor responsible for the result.
How should a Broward County board compare bids from contractors?
Give every bidder the same engineer's documents and quantities, and ask each for a phasing plan, schedule and list of the trades it performs itself. When choosing a general contractor in Broward County, check the state license and insurance through public records, and have the association's attorney and engineer review the proposals before the board votes.
Can a hotel on Fort Lauderdale beach stay open during an exterior renovation?
Yes, with a phasing plan built around occupancy. Work proceeds one elevation or wing at a time, rooms beside the active area are taken out of inventory, and noisy work is limited to agreed hours. Pool and amenity closures are scheduled for the slowest weeks. Guest paths, entrances and valet areas stay protected throughout.
What is the difference between the engineer and the contractor on a Hollywood condominium project?
The engineer is a licensed design professional hired by the association to inspect the building, specify the repairs and verify the work. The contractor builds what the engineer specified, manages the trades and holds the permit. Unified GCS is the contractor. Keeping the two roles separate gives the board an independent check on quality and quantities.
Regulations referenced
- Broward County Board of Rules and Appeals Policy 05-05: Building Safety Inspection Program
- Florida Statute 553.899: mandatory structural inspections for condominium and cooperative buildings
- Florida Statute 718.112: structural integrity reserve studies
This page is general information, not legal or engineering advice. Inspections are performed by licensed engineers and architects, and your building official sets the dates that apply to your property. Unified GCS is the contractor that carries out the repairs.
Referred by an engineer?
Have drawings, specifications or a full set of bid documents?
Most of our restoration, pool and roofing work comes to us through structural engineers, property engineers and board members. When the scope is already drawn and specified, we price exactly what is on the documents, flag anything that needs a question, and show every line so the board can compare bids fairly.
Request an estimate
Let's look at your building.
Send us the engineer's report, a few photos or a short description. We will schedule a site visit and follow up with a written scope.
- 45 years in the business
- Broward and Palm Beach counties
- Reply within one business day
Prefer to talk?(561) 678-4182
We reply within one business day. Your details are only used to respond to this request.