Waterproofing
Waterproofing & Leak Detection
Find where the water gets in, then close the building envelope for good.
In short
What is waterproofing?
Waterproofing is the set of membranes, coatings, sealants and flashings that keep water out of a building's structure and interior. A building needs it wherever concrete faces rain, soil or standing water: roofs, balconies, plaza and pool decks, planters, below-grade walls and facade joints. Leaks, efflorescence, cracked sealant and ponding are signs that an existing system has reached the end of its life.
Waterproofing
Almost every concrete problem in South Florida starts with water. We trace leaks to their source and install the right system for the surface, from below-grade walls to roofs, planters, balconies and facade joints.
Unified GCS has spent 45 years in this business. We carry out waterproofing projects across Broward and Palm Beach counties for condominium associations, property managers, commercial owners and industrial operators.
Written and reviewed by the Unified GCS project team, 45 years in concrete restoration and construction. Last reviewed October 2026.

Why it happens
Why water gets into South Florida buildings
Concrete is not watertight. It is porous, it cracks as it shrinks and moves, and every building is full of joints where one material meets another. South Florida adds heavy rain, wind that drives it sideways into walls and openings, a high water table and salt in the air. The sealants and membranes that keep water out are exposed to strong ultraviolet light and heat, which harden and crack them well before the structure itself wears out.
Water that gets in rarely stays where it entered. It follows the slab, the reinforcing or a conduit and appears on a ceiling or wall some distance away. On the way it carries chlorides to the steel, dissolves minerals that show as efflorescence, and feeds mold in interior finishes. Planters, pool decks and below-grade walls hold water against the structure constantly, so a small defect there does more harm than the same defect on a wall that dries between storms.
What is included
Waterproofing: scope of work
- 01Leak investigation and water testing
- 02Liquid-applied and sheet membrane systems
- 03Balcony, plaza and pool deck waterproofing
- 04Planter and below-grade waterproofing
- 05Sealant and expansion joint replacement
- 06Window and door perimeter sealing
How we do it
How a leak is traced and the envelope is sealed
Diagnosis comes first. We review where and when the leak appears, inspect the surfaces above and beside it, and test in a controlled order, wetting one component at a time from the lowest point upward so the entry path can be isolated. Flood testing a deck or planter, spray testing a window perimeter and taking moisture readings each answer a different question. Only when the path is confirmed is a system selected for that surface.
Preparation decides whether the system lasts. Old sealant and failed coatings are removed, cracks are routed, and the concrete is cleaned and profiled to the standard the manufacturer specifies. Moisture content is checked. Moving joints receive backer rod at the correct depth so the sealant bonds to two sides only and can stretch. Slope to drain is corrected where water ponds, and transitions at walls, drains, thresholds and penetrations are detailed with fabric or flashing before the field membrane goes on.
Liquid-applied membranes are installed to the wet film thickness on the data sheet, checked with a gauge as the work proceeds. Sheet membranes are lapped, rolled and terminated mechanically where required. Below-grade and planter systems are covered with drainage and protection board before backfill, and weep holes and drains are kept open. Where practical the finished membrane is flood tested before tile, pavers or soil cover it, because that is the last point at which a pinhole is easy to find.
Materials and systems
Polyurethane, PMMA, cementitious and sheet systems: which membrane goes where
Liquid-applied membranes dominate restoration work because they form a continuous layer without laps. Polyurethane is the general-purpose choice for decks and balconies. PMMA cures quickly, handles detailing around complicated penetrations and is often selected for roofs, planters and areas that cannot stay closed. Cementitious coatings bond to damp concrete and resist water pressure from behind, which suits tanks, fountains and the inside face of below-grade walls. Hot rubberized asphalt and cold fluid-applied systems are typical beneath pavers and planted areas on plaza decks.
Sheet membranes, self-adhered or torch-applied, give a factory-controlled thickness and are common on foundation walls and under topping slabs, though every lap is a potential leak. Sealant chemistry is chosen joint by joint: silicone for long-term ultraviolet resistance on facades and glazing, polyurethane where the joint will be painted or walked on, and hybrid products where compatibility is uncertain. Chemical grouts, usually polyurethane, are injected to stop active leaks. The right waterproofing system depends on substrate, exposure, movement and what will cover it.
What makes it last
What makes a membrane installation last, and what to ask before it is covered
Membranes rarely fail in the open field of a deck. They fail at terminations, drains, penetrations, door thresholds and changes of plane. Durable work shows reinforcing fabric or preformed flashing at every transition, sealant joints sized with the correct width-to-depth ratio, and primer matched to the substrate. Moisture in the slab is the other common cause of blistering and loss of bond, which is why moisture testing and the specified cure period for new concrete are not optional steps.
A waterproofing proposal should identify the manufacturer and system for each surface, the surface preparation standard, the thickness to be achieved and how it will be verified. Ask whether the installer is approved by that manufacturer, because many warranties require it, and whether a flood test or electronic leak detection is included before the membrane is buried. During the work, look for wet film gauge readings, adhesion tests and photographs of details. Warranty terms come from the manufacturer.

How a project runs
Planned around the people who use the building.
- 01
Walk the property
We start on site with your manager, board or engineer and look at the conditions first-hand.
- 02
Define the scope
You get a written scope tied to the engineer's report or our findings, with the phasing spelled out.
- 03
Plan access and safety
Swing stages, shoring, barricades, parking and resident notices are set before the first cut.
- 04
Do the work
Our crews carry out the repairs in sequence, with inspections at the points the engineer requires.
- 05
Close it out
Final inspections, permit closure and a record of what was done, for the association's files.
Summary
Waterproofing: key takeaways
- 01
Waterproofing fails most often at drains, thresholds, penetrations and terminations, not in the open field of the membrane.
- 02
Polyurethane, PMMA, cementitious and sheet membranes each suit different surfaces, and the manufacturer's data sheet defines where each may be used.
- 03
Sealant chemistry is selected joint by joint: silicone for sun-exposed facade joints, polyurethane where the joint is painted or walked on.
- 04
Flood testing a deck before tile, pavers or soil cover it is the last practical chance to find a pinhole.
Glossary
Terms you will see in the engineer's report
- Hydrostatic pressure
- The force exerted by standing or ground water against a wall or slab. Below-grade waterproofing must resist this pressure continuously.
- Backer rod
- A compressible foam rod pushed into a joint before sealant is applied, to control sealant depth and keep it off the back of the joint.
- Flood test
- A check in which a deck or planter is dammed and filled with shallow water for a set period while the space below is watched for leaks.
- Termination bar
- A metal or plastic strip fastened along the top edge of a membrane to clamp it to the wall, usually finished with a bead of sealant.
- Negative-side application
- Treatment applied to the interior face of a wall or slab, opposite the side water comes from. It is used when the wet face cannot be reached.
Questions
Waterproofing: common questions
How do you find the source of a leak?
We start with the building's history and a visual survey, then test suspect areas with controlled water testing and moisture readings. Water often travels a long way from where it enters to where it shows, so we confirm the path before recommending a repair.
How long does a waterproofing membrane last?
Service life depends on the system, the exposure and whether it is maintained. A membrane protected under pavers or tile is shielded from sunlight but cannot be inspected, while an exposed deck coating weathers faster but can be recoated. The manufacturer's data sheet and warranty terms give the expected life for each product, and periodic inspection extends it.
Can a leak be fixed from the inside?
Sometimes. Cracks and joints in below-grade walls can often be sealed from the interior by injecting a resin that reacts with water and fills the path. That stops the leak at that location, but water remains in the concrete behind it. Where the outside face is accessible, sealing the side the water comes from is usually the more durable repair.
What is the difference between a sealer, a coating and a membrane?
A penetrating sealer soaks into concrete and repels water without forming a film, so it cannot bridge cracks. A coating forms a thin film that sheds water and resists weather. A membrane is a thicker, flexible layer designed to stay watertight across cracks and under standing water. Decks over occupied space generally call for a membrane.
Does a planter on a plaza deck need its own waterproofing?
Yes. A planter holds wet soil against concrete permanently, and roots search out any gap. Planters are typically lined with a root-resistant membrane, protection board and a drainage layer, with weep outlets kept clear so water does not stand inside. The lining should tie into the surrounding deck membrane.
Can residents stay in the building during restoration?
In most projects, yes. Work is phased by elevation or stack, balconies are closed only while they are under repair, and notices go out before anything affects residents. We agree the sequence and access plan with the board and manager before work starts.
Do you work with our engineer?
Yes. Structural repairs are built to the specification of your engineer of record, and we coordinate inspections with them throughout the job. If you do not have an engineer yet, we can help you get started.
Standards and references
- International Concrete Repair Institute (ICRI): concrete repair guidelines
- American Concrete Institute (ACI): codes and guides for concrete construction and repair
- Florida Building Code
Repair methods and materials on every project follow the engineer's specification, the manufacturer's requirements and the building code in force. This page is general information, not engineering advice.
Related services
Concrete Restoration
Spalling, cracking and corroded rebar, repaired to the engineer's specification.
Commercial Roofing
Low-slope roofs repaired, restored or replaced to the consultant's specification, with the concrete deck fixed first.
Industrial Floors
Slabs placed flat, joints that hold up to forklifts, finishes that last.
Referred by an engineer?
Have drawings, specifications or a full set of bid documents?
Most of our restoration, pool and roofing work comes to us through structural engineers, property engineers and board members. When the scope is already drawn and specified, we price exactly what is on the documents, flag anything that needs a question, and show every line so the board can compare bids fairly.
Request an estimate
Let's look at your building.
Send us the engineer's report, a few photos or a short description. We will schedule a site visit and follow up with a written scope.
- 45 years in the business
- Broward and Palm Beach counties
- Reply within one business day
Prefer to talk?(561) 678-4182
We reply within one business day. Your details are only used to respond to this request.