Broward County, Florida
Stucco Repair and Painting in Broward County
Sound walls first, then a coating system that keeps the weather out.
In short
Who handles stucco repair and painting in Broward?
Unified GCS carries out stucco repair and painting in Broward County for condominium associations, hotels, shopping centers and commercial buildings. The work involves pressure cleaning, sounding the walls, cutting out and replacing delaminated stucco, repairing cracks, renewing sealant at windows and joints, and applying a primer and finish coating system rated for coastal sun, salt and rain.
Stucco & Painting · Broward
Stucco repair and painting in Broward County should be done in that order. Unified GCS sounds the facade, cuts out stucco that has delaminated from the wall, repairs the cracks and the concrete or masonry behind them, replaces the sealant at windows, doors and joints, and then applies a coating system specified for coastal exposure. The paint is the last step, and it lasts only as long as the wall beneath it stays sound and dry.
We do this work on high-rise and mid-rise condominiums, hotels, office and retail buildings and low-rise communities. On most projects the facade work runs alongside concrete repair, because rust-stained or bulging stucco is frequently the first visible sign of corroding steel in the wall, column or slab edge behind it. Opening those areas during the paint project avoids coating over damage that will push through within a few years.
Written and reviewed by the Unified GCS project team, 45 years in concrete restoration and construction. Last reviewed October 2026.


Local conditions
What Broward County weather does to stucco and coatings
Strong sun, salt and wind-driven rain break down exterior coatings faster in Broward than in most of the country. Chalking and fading appear first on south and west elevations. On the ocean side of buildings in Fort Lauderdale, Lauderdale-by-the-Sea and Pompano Beach, salt deposits sit on the film and hairline cracks open and close with temperature swings until water gets behind the coating.
Inland communities in Plantation, Sunrise, Tamarac, Coral Springs and Pembroke Pines have a different pattern. Large low-rise and mid-rise associations with many identical buildings tend to show cracking at floor lines and around openings, staining below windows, and stucco delamination on walkway and stair walls. The repairs are simpler than on an oceanfront tower, but the quantity is large and the phasing matters to residents.
Where this work is needed
Facades we repair and coat across Broward
Commercial facades make up a large share of exterior work in Broward. Shopping centers along Federal Highway, University Drive and State Road 7 have long stucco parapets, canopies and sign bands that crack at control joints and stain where water runs off the top of the wall. Concrete tilt-up warehouses in Pompano Beach, Deerfield Beach and near Port Everglades are painted panels with sealant joints between them, and the joints usually fail before the paint does, letting water into the building at each panel edge.
Residential facades in Broward vary with building height. Oceanfront towers have painted concrete and stucco over block infill, with cracks that follow the floor lines and bulges where slab edges are corroding. Hotels on Fort Lauderdale beach and Hollywood beach repaint more often because appearance is part of the business. Inland, the common building is a two- to four-story block structure with stucco walls, exterior stair towers and catwalk ceilings, where peeling usually begins at soffits and at the base of walls splashed by sprinklers.
What is included
Stucco repair and painting in Broward County: scope of work
- 01Stucco sounding, delamination removal and re-application
- 02Crack routing, sealing and patching
- 03Pressure cleaning and surface preparation
- 04Elastomeric and high-build exterior coatings
- 05Sealant replacement at windows, doors and joints
- 06Swing stage, scaffold and lift access

Our approach
How a facade project runs on an occupied property
The building is pressure cleaned, then sounded and marked so repair quantities can be agreed before work starts. Delaminated stucco is removed to a sound edge and reapplied in the correct number of coats with proper cure time. Cracks are routed and sealed or patched according to their width and movement. Sealant joints are cut out fully and replaced, not skimmed over.
Coatings are applied as a system: primer or sealer suited to the surface, then an elastomeric or high-build finish at the specified thickness. On towers we work from swing stages one drop at a time and notify residents before their windows and balconies are affected. On multi-building communities we complete one building fully before moving to the next, so residents see finished work and parking disruptions stay short.
Unified GCS has 45 years in the business. See the full stucco & painting service or everything we do in Broward County.
Planning the project
How a Broward association plans a paint project
A facade project in Broward begins with a written specification, not a color chart. The specification names the cleaning method, the stucco and crack repair details, the sealant, the primer, the finish product and the film thickness, so that every bidder is offering the same work. Structural items uncovered during sounding go to the association's engineer and are repaired under a permit from the city building department. The building official also confirms whether the stucco and coating scope needs its own permit in that city.
Color and timing are the two decisions that involve residents. Boards in Broward usually approve colors from large sample areas painted on the building, viewed in morning and afternoon light. Coatings need a dry wall and several dry hours after application, so painting moves faster outside the rainy season, although large communities run year-round and work around afternoon storms. The state structural integrity reserve study lists exterior painting as a required component, which helps an association fund repainting before the coating fails.
How a project runs
From the first site walk to the closed permit.
- 01
Walk the property
We start on site with your manager, board or engineer and look at the conditions first-hand.
- 02
Define the scope
You get a written scope tied to the engineer's report or our findings, with the phasing spelled out.
- 03
Plan access and safety
Swing stages, shoring, barricades, parking and resident notices are set before the first cut.
- 04
Do the work
Our crews carry out the repairs in sequence, with inspections at the points the engineer requires.
- 05
Close it out
Final inspections, permit closure and a record of what was done, for the association's files.
Cities served
Stucco & Painting across Broward County
Summary
Key takeaways for Broward owners and boards
- 01
Tilt-up warehouses in Pompano Beach and Deerfield Beach usually need panel joint sealant replaced before repainting.
- 02
Shopping center parapets and canopies along Broward commercial corridors crack at control joints and stain where water runs off the wall.
- 03
A written specification naming repairs, sealant, primer, finish and film thickness lets a Broward board compare bids on equal terms.
- 04
Florida's structural integrity reserve study lists exterior painting, so Broward condominium boards can fund repainting on a schedule.
Questions
Stucco & Painting in Broward: common questions
How often should a condominium in Broward County be repainted?
There is no fixed interval. Exposure, the quality of the last coating system and how well the sealants have held all affect it. Chalking that comes off on your hand, peeling, open cracks and dark streaks below windows are signs the coating is no longer protecting the wall and the building should be assessed.
What is an elastomeric coating, and does our Pompano Beach building need one?
An elastomeric coating is a thick, flexible exterior finish that can stretch across hairline cracks and resist wind-driven rain. It suits stucco and concrete walls with fine cracking and heavy weather exposure. It must go over a sound, dry, properly primed surface, or trapped moisture will blister it.
Do stucco repairs in Plantation or Sunrise communities need an engineer?
Cosmetic stucco and crack repairs generally do not. When sounding uncovers spalled concrete, exposed or corroded steel, or cracking that suggests structural movement, an engineer should look at it and specify the repair. We flag those locations as soon as they are found so they are not painted over.
Can a commercial building in Broward County be painted during the rainy season?
Yes, with planning. Crews start early, stop before the afternoon storms and do not coat walls that are still wet. Stucco repair and painting in Broward County takes longer between mid-May and mid-October than in the dry months, but large communities and commercial properties routinely work through summer on a schedule that allows for lost days.
How do tilt-up warehouse walls in Pompano Beach differ from stucco walls?
Tilt-up walls are solid concrete panels with sealant joints between them and little or no stucco. The work is joint replacement, crack repair, patching of spalls at panel edges and a coating suited to bare concrete. Failed joints are the usual source of water inside the building, so they are replaced before any paint is applied.
How does a Hollywood condominium board choose paint colors that last?
Ask for large mockups on the building itself, on a sunny elevation, and look at them at different times of day. Deep, saturated colors fade faster in South Florida sun than lighter tones. The coating manufacturer can advise which colors hold best in the chosen product, and the city can confirm any local color rules.
Regulations referenced
- Broward County Board of Rules and Appeals Policy 05-05: Building Safety Inspection Program
- Florida Statute 553.899: mandatory structural inspections for condominium and cooperative buildings
- Florida Statute 718.112: structural integrity reserve studies
This page is general information, not legal or engineering advice. Inspections are performed by licensed engineers and architects, and your building official sets the dates that apply to your property. Unified GCS is the contractor that carries out the repairs.
Referred by an engineer?
Have drawings, specifications or a full set of bid documents?
Most of our restoration, pool and roofing work comes to us through structural engineers, property engineers and board members. When the scope is already drawn and specified, we price exactly what is on the documents, flag anything that needs a question, and show every line so the board can compare bids fairly.
Request an estimate
Let's look at your building.
Send us the engineer's report, a few photos or a short description. We will schedule a site visit and follow up with a written scope.
- 45 years in the business
- Broward and Palm Beach counties
- Reply within one business day
Prefer to talk?(561) 678-4182
We reply within one business day. Your details are only used to respond to this request.