(561) 678-4182 Request an estimate

Palm Beach County, Florida

Industrial Concrete Floors in Palm Beach County

Slabs placed flat, joints that hold up to forklifts, finishes that last.

In short

Who handles industrial concrete floors in Palm Beach?

Unified GCS builds and repairs industrial concrete floors in Palm Beach County for warehouse, distribution, marine, aviation and manufacturing facilities. The work involves placing new slab-on-grade, replacing failed panels, rebuilding damaged joints, repairing cracks, grinding and polishing, and applying epoxy or urethane coatings, planned by zone so the building can keep operating while the floor is repaired.

Industrial Floors · Palm Beach

Industrial concrete floors in Palm Beach County serve warehouses, distribution buildings, marine and aviation service facilities, food and beverage operations and light manufacturing. Unified GCS places new slab-on-grade floors and replaces failed panels, repairs joints and cracks, grinds and polishes existing concrete, and installs epoxy and urethane coatings where the use calls for chemical resistance or a seamless, cleanable surface.

A floor should be judged by how it performs under the traffic it carries. Forklift operators feel every spalled joint. Narrow-aisle equipment needs flatness. Food and pharmaceutical users need surfaces that can be cleaned and that do not shed dust. We start by asking how the space is used and what the floor is doing wrong, then recommend repair, surface treatment or replacement accordingly.

Written and reviewed by the Unified GCS project team, 45 years in concrete restoration and construction. Last reviewed October 2026.

Industrial concrete floors in Palm Beach County by Unified GCS
Palm Beach County coastal condominium buildings

Local conditions

Industrial property in Palm Beach County

The county's industrial space is spread along the rail lines and Interstate 95. Riviera Beach and the area around the Port of Palm Beach handle port-related storage and marine trades. West Palm Beach has older warehouse districts and newer distribution buildings to the west. Boynton Beach, Delray Beach and Boca Raton have flex and light-industrial parks with a mix of warehouse, showroom and office use.

Many buildings in Riviera Beach, West Palm Beach and Lake Worth Beach are several decades old, with thin slabs, random cracking and joints that were never filled. As tenants change, the floor has to be adapted: old anchor holes and trenches patched, joints rebuilt for heavier equipment, and the surface polished or coated. In the flex parks to the south, polished concrete in showroom and customer areas is a frequent request.

Where this work is needed

Industrial districts and the floor conditions typical of each

Riviera Beach has the county's working waterfront. Buildings around the Port of Palm Beach and the marine yards along the Lake Worth Lagoon handle cargo, boat repair and storage, and their floors see heavy point loads, hard-wheeled equipment and salt water tracked in from outside. Typical findings are broken slab corners at dock doors, corroded trench drain frames and surface scaling in wash-down areas. Near Palm Beach International Airport in West Palm Beach, hangars and aviation service buildings need floors that resist fuel and hydraulic fluid and stay clean.

Along the Interstate 95 and rail corridor through Mangonia Park, West Palm Beach, Lake Worth Beach and Boynton Beach, the stock is multi-tenant warehouse of mixed age. Floors there have curled joints, cracks from decades of shrinkage and patches left by earlier tenants. Newer distribution buildings toward the turnpike and in Jupiter and Palm Beach Gardens have better slabs, and the requests are joint filling, densifying and polishing. Food, beverage and pharmaceutical users in Boca Raton and Delray Beach flex parks need sloped floors to drains and coved bases.

What is included

Industrial concrete floors in Palm Beach County: scope of work

  1. 01New slab-on-grade placement and finishing
  2. 02Joint repair, filling and rebuilding
  3. 03Crack and spall repair
  4. 04Concrete grinding, polishing and densifying
  5. 05Epoxy and urethane floor coatings
  6. 06Loading dock, ramp and equipment pad repairs
Industrial Floors work in progress in Palm Beach County

Our approach

Working inside an operating facility

We plan the work with the facility manager by zone and shift. Product and racking are moved out of one area at a time, repairs are completed and cured, and the area is handed back before the next is cleared. Night and weekend work is available where daytime shutdown is not possible. Return-to-service times are stated for each material before work is scheduled.

Joint repair includes cutting back damaged edges, rebuilding them with a repair mortar and filling the joint to full depth with a semi-rigid filler. Slab replacement includes subgrade correction and doweling into the adjacent panels. Grinding, polishing and surface preparation for coatings use vacuum-attached equipment to control dust around stored goods.

Unified GCS has 45 years in the business. See the full industrial floors service or everything we do in Palm Beach County.

Planning the project

Planning floor work in a working building

Floor repair inside an existing building is often maintenance that needs no permit, while new slabs, structural changes, equipment foundations and trench work generally do. The municipal building department, or the county Building Division for unincorporated sites, confirms which applies. Where rack loads, mezzanines or heavy equipment are involved, a structural engineer checks the slab and subgrade and specifies thickness, reinforcing and joint layout. Tenants should read the lease before starting, since many industrial leases require the landlord's consent for floor alterations.

Humidity and moisture drive the schedule more than rain does. Coatings fail when applied to slabs with high moisture vapor emission, which is a known risk here because of the high water table, so the slab is tested before a coating is specified. Dock-high buildings with open doors bring in humid air that slows cure and can leave condensation on a cool floor. Work is otherwise planned around the operation's peak periods, with weekend and night shifts used for areas that cannot be closed during the day.

How a project runs

From the first site walk to the closed permit.

  1. 01

    Walk the property

    We start on site with your manager, board or engineer and look at the conditions first-hand.

  2. 02

    Define the scope

    You get a written scope tied to the engineer's report or our findings, with the phasing spelled out.

  3. 03

    Plan access and safety

    Swing stages, shoring, barricades, parking and resident notices are set before the first cut.

  4. 04

    Do the work

    Our crews carry out the repairs in sequence, with inspections at the points the engineer requires.

  5. 05

    Close it out

    Final inspections, permit closure and a record of what was done, for the association's files.

Cities served

Industrial Floors across Palm Beach County

Summary

Key takeaways for Palm Beach owners and boards

  • 01

    Floors near the Port of Palm Beach in Riviera Beach take heavy point loads and tracked-in salt water.

  • 02

    Slabs in Palm Beach County should be tested for moisture vapor emission before a coating is specified, because the water table is high.

  • 03

    Hangar and aviation service floors near Palm Beach International Airport typically need coatings that resist fuel and hydraulic fluid.

  • 04

    In Palm Beach County, floor repair is often maintenance, while new slabs, equipment foundations and trench work generally require a building permit.

Questions

Industrial Floors in Palm Beach: common questions

Should a warehouse floor in Riviera Beach or West Palm Beach be polished or coated?

Polished concrete suits dry storage and distribution: it is hard, easy to clean and has no film to peel. Epoxy or urethane coatings suit areas with chemical exposure, wet processes or hygiene requirements. Slab moisture, existing contamination and traffic type all affect the choice, so we check the slab before recommending either.

Can an older slab in a Boynton Beach flex building be prepared for new racking?

Often it can. The slab thickness and condition are checked first, and a structural engineer confirms it can take the rack loads. Our work then covers crack and joint repair, patching of old anchor holes and trenches, and grinding to improve flatness. Where the slab is inadequate, sections are replaced.

How long before forklifts can use a repaired floor in Palm Beach County?

It depends on the material. Many joint fillers and rapid-setting repair mortars accept traffic within hours. New concrete panels and some coatings need longer to reach strength or cure. We give the return-to-traffic time for each product in writing so your operations team can plan around it.

Why do floor coatings blister or peel in warehouses in West Palm Beach and Riviera Beach?

The usual causes are moisture vapor rising through the slab, contamination such as oil left in the concrete, and surface preparation that did not open the concrete enough for the coating to bond. The remedy is to remove the failed coating, test the slab, prepare it mechanically and install a system rated for the measured moisture.

Can floor work in a Boca Raton or Delray Beach food facility be done without shutting down production?

In most facilities, yes, with planning. Work is divided into zones separated by dust and odor barriers, scheduled for nights, weekends or planned shutdowns, and done with fast-curing materials where the process allows. Most projects for industrial concrete floors in Palm Beach County are phased this way.

Does a tenant in a Boynton Beach or Jupiter warehouse need the landlord's approval to repair or coat the floor?

Usually. Industrial leases commonly require written consent for alterations, and a coating, a new trench or a replaced slab panel can count as one. The lease may also say who is responsible for floor repairs and how the floor must be left at the end of the term. Check with the landlord or property manager before scheduling.

Regulations referenced

This page is general information, not legal or engineering advice. Inspections are performed by licensed engineers and architects, and your building official sets the dates that apply to your property. Unified GCS is the contractor that carries out the repairs.

Referred by an engineer?

Have drawings, specifications or a full set of bid documents?

Most of our restoration, pool and roofing work comes to us through structural engineers, property engineers and board members. When the scope is already drawn and specified, we price exactly what is on the documents, flag anything that needs a question, and show every line so the board can compare bids fairly.

Request an estimate

Let's look at your building.

Send us the engineer's report, a few photos or a short description. We will schedule a site visit and follow up with a written scope.

  • 45 years in the business
  • Broward and Palm Beach counties
  • Reply within one business day

Prefer to talk?(561) 678-4182

Optional. For a large bid package, paste a download link in the message instead. Images or PDF, up to 50 MB.

We reply within one business day. Your details are only used to respond to this request.

Call Request an estimate